  # How To Calculate Cubic Yards Of Gravel

How To Calculate Cubic Yards Of Gravel. If your supplier sells materials such as gravel and aggregate by the ton, you would calculate the tons needed by dividing cubic feet by 21.6 (the amount of cubic feet in a ton). Start by measuring the length, width, and depth of the area you need to fill in the same unit of measurement.

Multiply area times the depth to get volume in cubic feet. Volume = 15 × 20 × (3/12) = 75 feet³. 0.7 cubic yard of gravel soil = 1.07 tonnes:

### A General Rule Of Thumb When Converting Cubic Yards Of Gravel To Tons Is To Multiply The Cubic Area By 1.4.

Enter the cost of gravel per ton. 0.7 cubic yard of gravel soil = 1.07 tonnes: How much does a cubic yard of gravel weigh.

### First, Find The Basic Conical Volume In Cubic Inches By Using The Formula Π D²H/12.

Enter the percentage of extra material. 1 / 2 cubic yard of gravel soil = 0.765 tonne: 0.9 cubic yard of gravel soil = 1.38.

### If Your Supplier Sells Materials Such As Gravel And Aggregate By The Ton, You Would Calculate The Tons Needed By Dividing Cubic Feet By 21.6 (The Amount Of Cubic Feet In A Ton).

1 cubic yard of gravel weight is 2800 lb, in united states, 1 ton of gravel is equal to 2000 pounds, convert tons of gravel to cubic yards = 2000/2800 = 0.714 cubic yards, so there are 0.714 cubic yards in a ton of gravel. Step one is establishing the volume of gravel needed. For bark or mulch, a nice thick depth would be 3 to 4 inches.

### A General Rule Of Thumb When Converting Tons Of Gravel To Cubic Yards Is To.

Determine the length and width of a cuboidal excavation. The calculator does the following conversions for you: Start by measuring the length, width, and depth of the area you need to fill in the same unit of measurement.

### To Determine The Area Of A Site In Cubic Yards, The Converted Measurements Are Multiplied Together.

Width/3 x length/3 x depth/36 = amount of gravel in cubic yards. Multiply area times the depth to get volume in cubic feet. The following calculator helps estimate the amount of gravel needed to cover an area based on the density and desired depth of the gravel.