How To Change The Battery In A Honda Pilot Key Fob. Twist the key to use it as leverage and the back of the key fob should pop off. Remove the battery carefully, trying not to touch the terminals.
Wedge the key and twist it gently. Being careful not to touch the battery terminals, remove it carefully. Press and slide the button that releases the metal key, then slide the key out.
Table of Contents
Press And Slide The Button That Releases The Metal Key, Then Slide The Key Out.
If this proves difficult, try using a flathead screwdriver instead. Take out the dead battery. With the key removed you can set the key between the front and back and turn it to pop the fob open.
Carefully Place The Edge Of The Key Into The Slot At The Top Of The Key Fob.
Hold your thumb right above where the battery is located. If it has a button that releases the key, click that button instead. Press and slide the button that releases the metal key, and then slide the key out.
Every Two Years Or So, Or When The Battery Is Low, You May Need To Change The Key Fob Battery.
With your free hand, remove the old battery and replace it with the new one. Wedge the key and lightly twist; How to change a dead coin cell battery in the combination key fob remote control and metal ignition key unit for the keyless entry system of a second generation 2009 to 2015 honda pilot suv with the replacement part number.
Carefully Place The Edge Of The Key Into The Slot At The Top Of The Key Fob;
It should fit into a small channel in the center. Finding the right honda key fob battery Locate the battery and pay attention to the orientation of the positive and negative sides.
How To Replace Honda Key Battery.
Remove the dead battery, taking note of. Pry the key fob open, being careful not to let the contents and external buttons fall out. Loosen the screw in a counterclockwise direction while applying downward pressure to prevent it from stripping.